Commercial & Industrial
Concrete Crack & Spall Repair
Cracks, spalls, pitting and failed joints repaired so the slab is sound and level before any finish goes down.
- Free Written Quotes
- Diamond-Ground Prep
- Commercial & Residential
- 53 Ontario Communities
TrueForm Epoxy
Concrete Repair: The Foundation of Every Finish
A flawless finish starts with a sound slab. Cracks, spalls, pitting, popouts and failed joints do not disappear under a coating; they telegraph through it or break it apart. We repair the concrete properly before any epoxy, polish or sealer goes down, and we also repair floors that simply need to be safe and level again.
Cracks are routed out and filled with rigid epoxy or flexible polyurea fillers depending on whether they are still moving. Spalled and pitted areas are cleaned back to sound concrete and rebuilt with repair mortars. Worn control joints in warehouses are cleaned out and refilled so forklift wheels stop chipping the edges. Grinding takes down lips and trip hazards.
We will always tell you what a repair can and cannot do. Some cracks come from structural movement or settlement that needs an engineer, and we will say so rather than cover it up.
The process
From first look to final reveal
01
Consultation
Send the square footage and a few photos, or book a visit. We look at the slab, the space and how you use it.
02
Written Quote
A clear quote listing the prep, repairs, system, finish, number of coats and schedule. No surprises.
03
Diamond-Ground Prep
The slab is ground, repaired and moisture-checked so the coating bonds to sound concrete.
04
Installation & Reveal
The system is built in layers, cured properly and handed back with care instructions.
Locations
Concrete Crack & Spall Repair by city
Halton Region
Toronto
York Region
Durham, Northumberland & Peterborough
Simcoe County & Georgian Bay
Hamilton & Niagara
- Concrete Crack & Spall Repair Hamilton
- Concrete Crack & Spall Repair Stoney Creek
- Concrete Crack & Spall Repair Grimsby
- Concrete Crack & Spall Repair St. Catharines
- Concrete Crack & Spall Repair Niagara Falls
- Concrete Crack & Spall Repair Welland
- Concrete Crack & Spall Repair Port Colborne
- Concrete Crack & Spall Repair Fort Erie
Brant, Haldimand & Norfolk
Waterloo Region & Wellington
Southwestern Ontario
- Concrete Crack & Spall Repair Woodstock
- Concrete Crack & Spall Repair Tillsonburg
- Concrete Crack & Spall Repair Stratford
- Concrete Crack & Spall Repair London
- Concrete Crack & Spall Repair St. Thomas
- Concrete Crack & Spall Repair Sarnia
- Concrete Crack & Spall Repair Chatham
- Concrete Crack & Spall Repair Windsor
Questions
Concrete Crack & Spall Repair: FAQs
Can you fix cracks in my garage floor?+
Yes. Most garage cracks are shrinkage or freeze-thaw cracks that we route out and fill before coating. Wide or uneven cracks that are still moving get a flexible filler, and we will tell you if a crack looks structural.
What causes spalling?+
Road salt, freeze-thaw cycles and water working into the surface are the usual causes in Ontario garages and parking areas. The weakened surface flakes away. We cut back to sound concrete and rebuild it before coating, which also protects it from further salt damage.
Will the repairs show?+
Under an opaque epoxy or flake system, properly prepared repairs are hidden. On polished or sealed concrete the repairs remain visible, because it is a natural finish.
Do you repair warehouse joints?+
Yes. Damaged control joints are cleaned out and refilled with a semi-rigid joint filler, which supports the edges and makes forklift traffic smoother and quieter.
Often paired with concrete grinding and coating removal, commercial epoxy flooring and garage floor epoxy.
Let's create a floor you'll be proud of.
Send the square footage and a few photos, or book a consultation. You will receive a clear written quote, with no obligation.