Seamless grey commercial epoxy floor

Fergus, Ontario

Epoxy flooring & polished concrete in Fergus

Commercial, warehouse and industrial floors for Fergus businesses, and garage and basement floors finished to a showroom standard, all built on diamond-ground, properly repaired concrete.

(647) 370-9166

Complimentary quote

Request Your Free Quote

Prefer to talk? (647) 370-9166

Commercial & ResidentialDiamond-Ground PrepFree Written QuotesPhased & After-Hours Installs

TrueForm Epoxy

Floors made for the way Fergus works and lives.

Fergus is the largest community in Centre Wellington, known for its limestone downtown on the Grand River, with Elora next door and farms, horse properties and rural homes all around.

We serve Fergus on the Grand River in Centre Wellington: from industrial areas on the south side of town, and the barns, shops and equipment buildings of rural Wellington County to limestone heritage homes, newer subdivisions and rural properties with shops. Every floor is planned around the slab in front of us and the way the space is used.

Diamond-ground prep

Every slab is mechanically ground, never just acid-washed, so the system bonds to sound concrete.

Moisture tested

Basements and slabs on grade are checked before a system is chosen.

Systems matched to use

Traffic, chemicals, sunlight and cleaning decide the system, not a one-size kit.

Written quotes

Prep, repairs, system, coats and schedule, in writing before any work begins.

The Floor Finder

Find the right system for your space

Tell us about the space and what matters most. We will suggest a system and help you measure the floor.

01 · Your space

02 · What matters most

Our recommendation

Full-broadcast flake system

Epoxy base, full flake broadcast and a clear UV-stable topcoat: textured, forgiving and built for salt and hot tires.

Explore this system →

03 · Square footage

Choose a typical garage or enter your own measurements. Quotes are based on square footage, so this is the most useful number to send us.

Approximate area

440 sq ft

Get a Quote for This Floor

Ready for an accurate quote? Have photos of the full floor, close-ups of cracks or old coatings, and any deadlines handy.

For businesses & contractors

A flooring partner for general contractors, property managers and multi-site owners.

Written bids to your specifications, after-hours and phased installs, and one point of contact from first walk-through to close-out.

One contact, every site

A single point of contact for your properties across Southern Ontario, with one schedule and one invoicing process.

Phased, after-hours installs

Evenings, weekends, shutdowns and phased zones so your business keeps operating.

Systems matched to use

Coatings chosen for your traffic, chemicals and cleaning, not one product for every floor.

Specs kept on file

Systems, colours and finishes recorded per site so every location and every repair matches.

Inspiration

Finishes to imagine your space

A look at the finishes we install, from reflective polished concrete to flake and metallic epoxy. Bring any photo you love to your consultation.

See recent projects on Instagram @trueformepoxy →

High-gloss garage floorHigh-gloss garage floor
Dark metallic-style epoxy floorDark metallic-style epoxy floor
Polished concrete showroomPolished concrete showroom
Full-broadcast flake garage floorFull-broadcast flake garage floor
Polished concrete lobbyPolished concrete lobby
Grey industrial epoxy floorGrey industrial epoxy floor

Areas served

Where we work

TrueForm Epoxy works throughout Fergus, including Downtown Fergus, Elora, Belwood, Salem and Centre Wellington countryside. We also serve nearby Guelph, Waterloo, Kitchener, Halton Hills, Cambridge and Milton and the rest of Waterloo Region & Wellington.

(647) 370-9166info@trueformepoxy.ca

Mon–Sat 9am–6pm

Investment

What shapes the price of a floor in Fergus

Every slab is different, so every floor is quoted in writing. These are the factors that move the number.

Square footage

The single biggest factor. Larger floors spread setup and prep across more area.

Slab condition

Cracks, spalling, pitting and uneven joints all need repair before coating.

Existing coatings

Old epoxy, paint, glue or tile has to be ground off first.

Moisture

Damp slabs may need a moisture-mitigating primer.

System & finish

Solid, flake and metallic epoxy, polyaspartic topcoats and polishing levels differ in materials and labour.

Access & schedule

After-hours, phased or weekend work and occupied spaces take more planning.

The process

Four steps, done properly

01

Consultation

Send the square footage and a few photos, or book a visit. We look at the slab, the space and how you use it.

02

Written Quote

A clear quote listing the prep, repairs, system, finish, number of coats and schedule. No surprises.

03

Diamond-Ground Prep

The slab is ground, repaired and moisture-checked so the coating bonds to sound concrete.

04

Installation & Reveal

The system is built in layers, cured properly and handed back with care instructions.

Complimentary quote

Begin your floor.

Tell us about the space in four short steps. We reply with questions or a written quote, usually within one business day.

  1. Share the details

    Service, location, size and finish.

  2. Receive your quote

    Prep, system, coats and schedule, in writing.

  3. Enjoy the floor

    Installed properly and handed back with care instructions.

Prefer to talk? (647) 370-9166

01 Service

02 Location

03 Details

04 Contact

What can we create for you?

Commercial & Industrial

Garages, Basements & Homes

Questions

Frequently asked

Do you install commercial epoxy flooring in Fergus?+

Yes. We install commercial and industrial epoxy, polished concrete and concrete repair across Fergus, including industrial areas on the south side of town. Installs can be phased or done after hours so your business keeps running.

How much does a garage floor coating cost in Fergus?+

It depends on the square footage, the condition of the slab, any repairs or old coatings, and the finish you choose. Send the approximate size and a few photos and we will send a free written quote.

Will an epoxy floor hold up to Fergus winters?+

Cold, snowy winters and heavy salt use mean garage and shop floors here take a beating, and the area's many manufacturers need floors that handle traffic and spills. A properly installed system over a diamond-ground slab seals the concrete so salt brine and meltwater stay on the surface, where they can be cleaned off.

Can you coat a basement floor in Fergus?+

Yes. We test the slab for moisture first, then grind, repair and install a system suited to the readings, using a moisture-mitigating primer where needed.

Which parts of Fergus do you serve?+

All of Fergus, including Downtown Fergus, Elora, Belwood, Salem and Centre Wellington countryside, as well as nearby Guelph, Waterloo, Kitchener and Halton Hills.

Do you offer polished concrete in Fergus?+

Yes. We grind, densify and polish concrete to matte, satin or high gloss for showrooms, retail, offices, warehouses and modern homes, and offer grind and seal as a lower-cost alternative.

How do I get a quote in Fergus?+

Use the form on this page or call (647) 370-9166. Tell us the service, the approximate square footage and the finish you are considering; photos help. We send a written quote listing the prep, the system, the coats and the schedule.

Epoxy Flooring and Polished Concrete for Fergus Businesses and Homes

Commercial Epoxy Flooring in Fergus

Businesses in Fergus work in all kinds of spaces, from industrial areas on the south side of town, and the barns, shops and equipment buildings of rural Wellington County. Whatever the space, a seamless epoxy floor gives customers a clean first impression and gives staff a surface that is easy to keep clean.

Our Fergus commercial installs follow the same sequence every time: dust-controlled diamond grinding, crack and joint repair, a moisture check, then the epoxy system in layers, with slip resistance and cove base where the space needs them. We schedule around your hours and tell you in writing when each area reopens.

Warehouse and Industrial Floors in Fergus

Fergus and the area around it are home to industrial areas on the south side of town, and the barns, shops and equipment buildings of rural Wellington County. In those buildings the floor is a working surface, and an industrial epoxy system protects it while making the space brighter, safer and easier to clean.

A Fergus industrial install starts with a walk-through of the traffic, chemicals and joints, then proper surface profiling, joint and crack repair and a high-build system. We plan the zones around shifts and shipping, and mark aisles and safety areas as part of the finished floor.

Polished Concrete in Fergus

In Fergus, polished concrete is a natural fit for showrooms, offices, retail and warehouse space, and for modern homes and lower levels. It turns the slab you already have into a hard, reflective finish that is simple to maintain.

Every Fergus polishing job is planned around the slab in front of us: how hard it is, what is on it now, and how much aggregate you want to see. From there it is metal-bond grinding, densifier, resin-bond polishing and a stain guard, finished to matte, satin or high gloss.

Concrete Repair in Fergus

Cold, snowy winters and heavy salt use mean garage and shop floors here take a beating, and the area's many manufacturers need floors that handle traffic and spills. That is why so many Fergus slabs we see, from limestone heritage homes, newer subdivisions and rural properties with shops to the floors of industrial areas on the south side of town, have cracks, spalling or pitting that needs repair before anything else.

Garage Floor Epoxy in Fergus

Cold, snowy winters and heavy salt use mean garage and shop floors here take a beating, and the area's many manufacturers need floors that handle traffic and spills. In Fergus, that means garage floors in limestone heritage homes, newer subdivisions and rural properties with shops take months of salt brine and meltwater every winter, and bare or DIY-coated concrete starts to stain, pit and peel.

Across Fergus, from Downtown Fergus and Elora to every other part of town, we turn garage slabs into seamless, easy-clean floors: ground and repaired, coated in layers, and finished with a clear protective topcoat. Flake, solid colour and metallic finishes are all available.

Basement Epoxy Flooring in Fergus

For Fergus homeowners in Downtown Fergus, Elora and Belwood and beyond, an epoxy basement floor is one of the simplest ways to make a lower level feel finished: a home gym, playroom, laundry, workshop or living space with a seamless, easy-clean floor.

Every Fergus basement starts with a moisture test, then diamond grinding, crack repair and a moisture-mitigating primer where readings call for one. From there you choose solid, flake or metallic, finished with a clear protective topcoat.

Flake, Metallic and Polyaspartic Finishes

In Fergus garages, basements and workshops, a full-broadcast flake floor is a practical favourite: textured, forgiving and easy to keep looking clean through a long Ontario winter.

Metallic epoxy is the floor we recommend when a Fergus space should feel luxurious: a collector's garage, a basement bar, a home theatre or a boutique showroom.

Polyaspartic coatings suit Fergus garages and businesses that want a clear, non-ambering finish and less time out of service, from limestone heritage homes, newer subdivisions and rural properties with shops to commercial units and showrooms.

CallFree Quote