Orillia, Ontario
Epoxy flooring & polished concrete in Orillia
Commercial, warehouse and industrial floors for Orillia businesses, and garage and basement floors finished to a showroom standard, all built on diamond-ground, properly repaired concrete.
(647) 370-9166TrueForm Epoxy
Floors made for the way Orillia works and lives.
Orillia sits between Lake Simcoe and Lake Couchiching, with older homes near downtown and the waterfront, post-war neighbourhoods across the city and newer subdivisions in the west end.
We serve Orillia between Lake Simcoe and Lake Couchiching: from industrial parks off Highway 11, commercial corridors on West Street and Memorial Avenue, and marinas, resorts and restaurants on the lakes to older character homes, post-war houses and newer west-end subdivisions. Every floor is planned around the slab in front of us and the way the space is used.
Diamond-ground prep
Every slab is mechanically ground, never just acid-washed, so the system bonds to sound concrete.
Moisture tested
Basements and slabs on grade are checked before a system is chosen.
Systems matched to use
Traffic, chemicals, sunlight and cleaning decide the system, not a one-size kit.
Written quotes
Prep, repairs, system, coats and schedule, in writing before any work begins.
Commercial & Industrial
Commercial floors in Orillia
Epoxy, polished concrete and concrete repair for showrooms, warehouses, plants, kitchens, clinics and offices, installed around your hours.
Garages, Basements & Homes
Garage & basement floors in Orillia
Flake, metallic and solid epoxy, polyaspartic topcoats and stained concrete: the garage and lower level, finished to the standard of the rest of your home.
The Floor Finder
Find the right system for your space
Tell us about the space and what matters most. We will suggest a system and help you measure the floor.
01 · Your space
02 · What matters most
Our recommendation
Full-broadcast flake system
Epoxy base, full flake broadcast and a clear UV-stable topcoat: textured, forgiving and built for salt and hot tires.
Explore this system →03 · Square footage
Choose a typical garage or enter your own measurements. Quotes are based on square footage, so this is the most useful number to send us.
Approximate area
440 sq ft
Ready for an accurate quote? Have photos of the full floor, close-ups of cracks or old coatings, and any deadlines handy.
For businesses & contractors
A flooring partner for general contractors, property managers and multi-site owners.
Written bids to your specifications, after-hours and phased installs, and one point of contact from first walk-through to close-out.
One contact, every site
A single point of contact for your properties across Southern Ontario, with one schedule and one invoicing process.
Phased, after-hours installs
Evenings, weekends, shutdowns and phased zones so your business keeps operating.
Systems matched to use
Coatings chosen for your traffic, chemicals and cleaning, not one product for every floor.
Specs kept on file
Systems, colours and finishes recorded per site so every location and every repair matches.
Inspiration
Finishes to imagine your space
A look at the finishes we install, from reflective polished concrete to flake and metallic epoxy. Bring any photo you love to your consultation.
See recent projects on Instagram @trueformepoxy →
High-gloss garage floor
Dark metallic-style epoxy floor
Polished concrete showroom
Full-broadcast flake garage floor
Polished concrete lobby
Grey industrial epoxy floorAreas served
Where we work
TrueForm Epoxy works throughout Orillia, including Downtown Orillia, West Ridge, North Ward, South Ward and Couchiching. We also serve nearby Barrie, Innisfil, Bradford, Newmarket, Collingwood and Aurora and the rest of Simcoe County & Georgian Bay.
(647) 370-9166info@trueformepoxy.caMon–Sat 9am–6pm
Investment
What shapes the price of a floor in Orillia
Every slab is different, so every floor is quoted in writing. These are the factors that move the number.
Square footage
The single biggest factor. Larger floors spread setup and prep across more area.
Slab condition
Cracks, spalling, pitting and uneven joints all need repair before coating.
Existing coatings
Old epoxy, paint, glue or tile has to be ground off first.
Moisture
Damp slabs may need a moisture-mitigating primer.
System & finish
Solid, flake and metallic epoxy, polyaspartic topcoats and polishing levels differ in materials and labour.
Access & schedule
After-hours, phased or weekend work and occupied spaces take more planning.
The process
Four steps, done properly
01
Consultation
Send the square footage and a few photos, or book a visit. We look at the slab, the space and how you use it.
02
Written Quote
A clear quote listing the prep, repairs, system, finish, number of coats and schedule. No surprises.
03
Diamond-Ground Prep
The slab is ground, repaired and moisture-checked so the coating bonds to sound concrete.
04
Installation & Reveal
The system is built in layers, cured properly and handed back with care instructions.
Services
Our Orillia services
Commercial & Industrial
Complimentary quote
Begin your floor.
Tell us about the space in four short steps. We reply with questions or a written quote, usually within one business day.
Share the details
Service, location, size and finish.
Receive your quote
Prep, system, coats and schedule, in writing.
Enjoy the floor
Installed properly and handed back with care instructions.
Prefer to talk? (647) 370-9166
Questions
Frequently asked
Do you install commercial epoxy flooring in Orillia?+
Yes. We install commercial and industrial epoxy, polished concrete and concrete repair across Orillia, including industrial parks off Highway 11. Installs can be phased or done after hours so your business keeps running.
How much does a garage floor coating cost in Orillia?+
It depends on the square footage, the condition of the slab, any repairs or old coatings, and the finish you choose. Send the approximate size and a few photos and we will send a free written quote.
Will an epoxy floor hold up to Orillia winters?+
Heavy lake-effect snow, long winters and plenty of salt and sand mean garage floors in Simcoe County spend months under meltwater, and cottage-country slabs often need extra repair. A properly installed system over a diamond-ground slab seals the concrete so salt brine and meltwater stay on the surface, where they can be cleaned off.
Can you coat a basement floor in Orillia?+
Yes. We test the slab for moisture first, then grind, repair and install a system suited to the readings, using a moisture-mitigating primer where needed.
Which parts of Orillia do you serve?+
All of Orillia, including Downtown Orillia, West Ridge, North Ward, South Ward and Couchiching, as well as nearby Barrie, Innisfil, Bradford and Newmarket.
Do you offer polished concrete in Orillia?+
Yes. We grind, densify and polish concrete to matte, satin or high gloss for showrooms, retail, offices, warehouses and modern homes, and offer grind and seal as a lower-cost alternative.
How do I get a quote in Orillia?+
Use the form on this page or call (647) 370-9166. Tell us the service, the approximate square footage and the finish you are considering; photos help. We send a written quote listing the prep, the system, the coats and the schedule.
Epoxy Flooring and Polished Concrete for Orillia Businesses and Homes
Commercial Epoxy Flooring in Orillia
Businesses in Orillia work in all kinds of spaces, from industrial parks off Highway 11, commercial corridors on West Street and Memorial Avenue, and marinas, resorts and restaurants on the lakes. Whatever the space, a seamless epoxy floor gives customers a clean first impression and gives staff a surface that is easy to keep clean.
Our Orillia commercial installs follow the same sequence every time: dust-controlled diamond grinding, crack and joint repair, a moisture check, then the epoxy system in layers, with slip resistance and cove base where the space needs them. We schedule around your hours and tell you in writing when each area reopens.
Warehouse and Industrial Floors in Orillia
Orillia and the area around it are home to industrial parks off Highway 11, commercial corridors on West Street and Memorial Avenue, and marinas, resorts and restaurants on the lakes. In those buildings the floor is a working surface, and an industrial epoxy system protects it while making the space brighter, safer and easier to clean.
A Orillia industrial install starts with a walk-through of the traffic, chemicals and joints, then proper surface profiling, joint and crack repair and a high-build system. We plan the zones around shifts and shipping, and mark aisles and safety areas as part of the finished floor.
Polished Concrete in Orillia
In Orillia, polished concrete is a natural fit for showrooms, offices, retail and warehouse space, and for modern homes and lower levels. It turns the slab you already have into a hard, reflective finish that is simple to maintain.
Every Orillia polishing job is planned around the slab in front of us: how hard it is, what is on it now, and how much aggregate you want to see. From there it is metal-bond grinding, densifier, resin-bond polishing and a stain guard, finished to matte, satin or high gloss.
Concrete Repair in Orillia
Heavy lake-effect snow, long winters and plenty of salt and sand mean garage floors in Simcoe County spend months under meltwater, and cottage-country slabs often need extra repair. That is why so many Orillia slabs we see, from older character homes, post-war houses and newer west-end subdivisions to the floors of industrial parks off Highway 11, have cracks, spalling or pitting that needs repair before anything else.
Garage Floor Epoxy in Orillia
Heavy lake-effect snow, long winters and plenty of salt and sand mean garage floors in Simcoe County spend months under meltwater, and cottage-country slabs often need extra repair. In Orillia, that means garage floors in older character homes, post-war houses and newer west-end subdivisions take months of salt brine and meltwater every winter, and bare or DIY-coated concrete starts to stain, pit and peel.
Across Orillia, from Downtown Orillia and West Ridge to every other part of town, we turn garage slabs into seamless, easy-clean floors: ground and repaired, coated in layers, and finished with a clear protective topcoat. Flake, solid colour and metallic finishes are all available.
Basement Epoxy Flooring in Orillia
For Orillia homeowners in Downtown Orillia, West Ridge and North Ward and beyond, an epoxy basement floor is one of the simplest ways to make a lower level feel finished: a home gym, playroom, laundry, workshop or living space with a seamless, easy-clean floor.
Every Orillia basement starts with a moisture test, then diamond grinding, crack repair and a moisture-mitigating primer where readings call for one. From there you choose solid, flake or metallic, finished with a clear protective topcoat.
Flake, Metallic and Polyaspartic Finishes
In Orillia garages, basements and workshops, a full-broadcast flake floor is a practical favourite: textured, forgiving and easy to keep looking clean through a long Ontario winter.
Metallic epoxy is the floor we recommend when a Orillia space should feel luxurious: a collector's garage, a basement bar, a home theatre or a boutique showroom.
Polyaspartic coatings suit Orillia garages and businesses that want a clear, non-ambering finish and less time out of service, from older character homes, post-war houses and newer west-end subdivisions to commercial units and showrooms.