St. Catharines, Ontario
Epoxy flooring & polished concrete in St. Catharines
Commercial, warehouse and industrial floors for St. Catharines businesses, and garage and basement floors finished to a showroom standard, all built on diamond-ground, properly repaired concrete.
(647) 370-9166TrueForm Epoxy
Floors made for the way St. Catharines works and lives.
St. Catharines is the largest city in Niagara Region, with century homes downtown and in Western Hill, post-war bungalows in Grantham and Merritton, lakeside homes near Port Weller and newer townhomes across the north end.
We serve St. Catharines from Port Dalhousie to the Welland Canal: from industrial lands along the Welland Canal, Ontario Street and the QEW, plus the restaurants, wineries and hospitality businesses of the Garden City to century homes, post-war bungalows and newer townhomes. Every floor is planned around the slab in front of us and the way the space is used.
Diamond-ground prep
Every slab is mechanically ground, never just acid-washed, so the system bonds to sound concrete.
Moisture tested
Basements and slabs on grade are checked before a system is chosen.
Systems matched to use
Traffic, chemicals, sunlight and cleaning decide the system, not a one-size kit.
Written quotes
Prep, repairs, system, coats and schedule, in writing before any work begins.
Commercial & Industrial
Commercial floors in St. Catharines
Epoxy, polished concrete and concrete repair for showrooms, warehouses, plants, kitchens, clinics and offices, installed around your hours.
Garages, Basements & Homes
Garage & basement floors in St. Catharines
Flake, metallic and solid epoxy, polyaspartic topcoats and stained concrete: the garage and lower level, finished to the standard of the rest of your home.
The Floor Finder
Find the right system for your space
Tell us about the space and what matters most. We will suggest a system and help you measure the floor.
01 · Your space
02 · What matters most
Our recommendation
Full-broadcast flake system
Epoxy base, full flake broadcast and a clear UV-stable topcoat: textured, forgiving and built for salt and hot tires.
Explore this system →03 · Square footage
Choose a typical garage or enter your own measurements. Quotes are based on square footage, so this is the most useful number to send us.
Approximate area
440 sq ft
Ready for an accurate quote? Have photos of the full floor, close-ups of cracks or old coatings, and any deadlines handy.
For businesses & contractors
A flooring partner for general contractors, property managers and multi-site owners.
Written bids to your specifications, after-hours and phased installs, and one point of contact from first walk-through to close-out.
One contact, every site
A single point of contact for your properties across Southern Ontario, with one schedule and one invoicing process.
Phased, after-hours installs
Evenings, weekends, shutdowns and phased zones so your business keeps operating.
Systems matched to use
Coatings chosen for your traffic, chemicals and cleaning, not one product for every floor.
Specs kept on file
Systems, colours and finishes recorded per site so every location and every repair matches.
Inspiration
Finishes to imagine your space
A look at the finishes we install, from reflective polished concrete to flake and metallic epoxy. Bring any photo you love to your consultation.
See recent projects on Instagram @trueformepoxy →
High-gloss garage floor
Dark metallic-style epoxy floor
Polished concrete showroom
Full-broadcast flake garage floor
Polished concrete lobby
Grey industrial epoxy floorAreas served
Where we work
TrueForm Epoxy works throughout St. Catharines, including Port Dalhousie, Downtown St. Catharines, Merritton, Grantham, Western Hill, Glenridge and Port Weller. We also serve nearby Niagara Falls, Welland, Grimsby, Port Colborne, Fort Erie and Stoney Creek and the rest of Hamilton & Niagara.
(647) 370-9166info@trueformepoxy.caMon–Sat 9am–6pm
Investment
What shapes the price of a floor in St. Catharines
Every slab is different, so every floor is quoted in writing. These are the factors that move the number.
Square footage
The single biggest factor. Larger floors spread setup and prep across more area.
Slab condition
Cracks, spalling, pitting and uneven joints all need repair before coating.
Existing coatings
Old epoxy, paint, glue or tile has to be ground off first.
Moisture
Damp slabs may need a moisture-mitigating primer.
System & finish
Solid, flake and metallic epoxy, polyaspartic topcoats and polishing levels differ in materials and labour.
Access & schedule
After-hours, phased or weekend work and occupied spaces take more planning.
The process
Four steps, done properly
01
Consultation
Send the square footage and a few photos, or book a visit. We look at the slab, the space and how you use it.
02
Written Quote
A clear quote listing the prep, repairs, system, finish, number of coats and schedule. No surprises.
03
Diamond-Ground Prep
The slab is ground, repaired and moisture-checked so the coating bonds to sound concrete.
04
Installation & Reveal
The system is built in layers, cured properly and handed back with care instructions.
Services
Our St. Catharines services
Commercial & Industrial
Complimentary quote
Begin your floor.
Tell us about the space in four short steps. We reply with questions or a written quote, usually within one business day.
Share the details
Service, location, size and finish.
Receive your quote
Prep, system, coats and schedule, in writing.
Enjoy the floor
Installed properly and handed back with care instructions.
Prefer to talk? (647) 370-9166
Questions
Frequently asked
Do you install commercial epoxy flooring in St. Catharines?+
Yes. We install commercial and industrial epoxy, polished concrete and concrete repair across St. Catharines, including industrial lands along the Welland Canal. Installs can be phased or done after hours so your business keeps running.
How much does a garage floor coating cost in St. Catharines?+
It depends on the square footage, the condition of the slab, any repairs or old coatings, and the finish you choose. Send the approximate size and a few photos and we will send a free written quote.
Will an epoxy floor hold up to St. Catharines winters?+
Humidity off two lakes, freeze-thaw cycles on the escarpment and salt from the QEW and 403 all work their way into unprotected concrete. A properly installed system over a diamond-ground slab seals the concrete so salt brine and meltwater stay on the surface, where they can be cleaned off.
Can you coat a basement floor in St. Catharines?+
Yes. We test the slab for moisture first, then grind, repair and install a system suited to the readings, using a moisture-mitigating primer where needed.
Which parts of St. Catharines do you serve?+
All of St. Catharines, including Port Dalhousie, Downtown St. Catharines, Merritton, Grantham, Western Hill, Glenridge and Port Weller, as well as nearby Niagara Falls, Welland, Grimsby and Port Colborne.
Do you offer polished concrete in St. Catharines?+
Yes. We grind, densify and polish concrete to matte, satin or high gloss for showrooms, retail, offices, warehouses and modern homes, and offer grind and seal as a lower-cost alternative.
How do I get a quote in St. Catharines?+
Use the form on this page or call (647) 370-9166. Tell us the service, the approximate square footage and the finish you are considering; photos help. We send a written quote listing the prep, the system, the coats and the schedule.
Epoxy Flooring and Polished Concrete for St. Catharines Businesses and Homes
Commercial Epoxy Flooring in St. Catharines
Businesses in St. Catharines work in all kinds of spaces, from industrial lands along the Welland Canal, Ontario Street and the QEW, plus the restaurants, wineries and hospitality businesses of the Garden City. Whatever the space, a seamless epoxy floor gives customers a clean first impression and gives staff a surface that is easy to keep clean.
Our St. Catharines commercial installs follow the same sequence every time: dust-controlled diamond grinding, crack and joint repair, a moisture check, then the epoxy system in layers, with slip resistance and cove base where the space needs them. We schedule around your hours and tell you in writing when each area reopens.
Warehouse and Industrial Floors in St. Catharines
St. Catharines and the area around it are home to industrial lands along the Welland Canal, Ontario Street and the QEW, plus the restaurants, wineries and hospitality businesses of the Garden City. In those buildings the floor is a working surface, and an industrial epoxy system protects it while making the space brighter, safer and easier to clean.
A St. Catharines industrial install starts with a walk-through of the traffic, chemicals and joints, then proper surface profiling, joint and crack repair and a high-build system. We plan the zones around shifts and shipping, and mark aisles and safety areas as part of the finished floor.
Polished Concrete in St. Catharines
In St. Catharines, polished concrete is a natural fit for showrooms, offices, retail and warehouse space, and for modern homes and lower levels. It turns the slab you already have into a hard, reflective finish that is simple to maintain.
Every St. Catharines polishing job is planned around the slab in front of us: how hard it is, what is on it now, and how much aggregate you want to see. From there it is metal-bond grinding, densifier, resin-bond polishing and a stain guard, finished to matte, satin or high gloss.
Concrete Repair in St. Catharines
Humidity off two lakes, freeze-thaw cycles on the escarpment and salt from the QEW and 403 all work their way into unprotected concrete. That is why so many St. Catharines slabs we see, from century homes, post-war bungalows and newer townhomes to the floors of industrial lands along the Welland Canal, have cracks, spalling or pitting that needs repair before anything else.
Garage Floor Epoxy in St. Catharines
Humidity off two lakes, freeze-thaw cycles on the escarpment and salt from the QEW and 403 all work their way into unprotected concrete. In St. Catharines, that means garage floors in century homes, post-war bungalows and newer townhomes take months of salt brine and meltwater every winter, and bare or DIY-coated concrete starts to stain, pit and peel.
Across St. Catharines, from Port Dalhousie and Downtown St. Catharines to every other part of town, we turn garage slabs into seamless, easy-clean floors: ground and repaired, coated in layers, and finished with a clear protective topcoat. Flake, solid colour and metallic finishes are all available.
Basement Epoxy Flooring in St. Catharines
For St. Catharines homeowners in Port Dalhousie, Downtown St. Catharines and Merritton and beyond, an epoxy basement floor is one of the simplest ways to make a lower level feel finished: a home gym, playroom, laundry, workshop or living space with a seamless, easy-clean floor.
Every St. Catharines basement starts with a moisture test, then diamond grinding, crack repair and a moisture-mitigating primer where readings call for one. From there you choose solid, flake or metallic, finished with a clear protective topcoat.
Flake, Metallic and Polyaspartic Finishes
In St. Catharines garages, basements and workshops, a full-broadcast flake floor is a practical favourite: textured, forgiving and easy to keep looking clean through a long Ontario winter.
Metallic epoxy is the floor we recommend when a St. Catharines space should feel luxurious: a collector's garage, a basement bar, a home theatre or a boutique showroom.
Polyaspartic coatings suit St. Catharines garages and businesses that want a clear, non-ambering finish and less time out of service, from century homes, post-war bungalows and newer townhomes to commercial units and showrooms.