Commercial & Industrial · Kingston
Warehouse & Industrial Epoxy in Kingston
Heavy-duty coatings for warehouses and plants, built for forklifts, pallet jacks, impact and spills.
- Free Written Quotes
- Diamond-Ground Prep
- Commercial & Residential
- 53 Ontario Communities
Kingston, Eastern Ontario
Warehouse & Industrial Epoxy in Kingston
Industrial floors in Kingston carry real loads. From north-end industrial areas near the 401, Queen's University, the hospitals and CFB Kingston, and the restaurants and hospitality of the downtown waterfront, slabs take forklift traffic, pallet jacks, dropped loads and spills every shift, and bare concrete dusts, stains and breaks down at the joints.
We prepare Kingston warehouse and plant floors with diamond grinding or shot blasting, repair cracks and control joints, and install an epoxy system built for your equipment, with line striping and walkways laid out in the floor. Work is phased by zone so the building keeps running.
Call (647) 370-9166 or send the form on this page for a free industrial epoxy quote in Kingston. Send the approximate square footage and a few photos, and we will come back with a written quote that lists the prep, the system, the number of coats and the schedule.
The system
Warehouse & Industrial Floors That Keep Working
Warehouses, distribution centres and plants are hard on concrete. Forklift and pallet-jack wheels grind at the surface, dropped loads chip it, and oil, hydraulic fluid and cleaning chemicals soak into bare slabs. An industrial epoxy system seals the concrete, cuts dusting, brightens the space and gives you a surface that is far easier to sweep and scrub.
Industrial jobs are mostly about preparation and planning. We diamond-grind or shot-blast the slab to a proper profile, repair cracks and spalls, fill or rebuild failed control joints, and choose a system thick enough for the traffic. Safety line striping, walkways and colour-coded zones can be built into the floor at the same time.
More about warehouse & industrial epoxy →The process
How your Kingston project comes together
01
Consultation
Send the square footage and a few photos, or book a visit. We look at the slab, the space and how you use it.
02
Written Quote
A clear quote listing the prep, repairs, system, finish, number of coats and schedule. No surprises.
03
Diamond-Ground Prep
The slab is ground, repaired and moisture-checked so the coating bonds to sound concrete.
04
Installation & Reveal
The system is built in layers, cured properly and handed back with care instructions.
Across Kingston
Warehouse & Industrial Epoxy throughout Kingston
Kingston's limestone downtown and the Sydenham District hold some of the oldest homes in Ontario, with post-war neighbourhoods around Portsmouth and newer subdivisions in the west end and Kingston East.
Questions
Warehouse & Industrial Epoxy in Kingston: FAQs
How do I get a warehouse & industrial epoxy quote in Kingston?+
Call (647) 370-9166, use the form on this page or email info@trueformepoxy.ca. Send the approximate square footage and a few photos and we will send a written quote for your Kingston project.
Will epoxy hold up to forklifts?+
Yes, when the slab is properly prepared and the system is thick enough for the traffic. We size the system to your equipment and repair damaged joints first, because joint edges are where forklift damage usually starts.
Can you work while our warehouse is operating?+
Usually. We divide the floor into zones and schedule around shifts, racking and loading so only part of the building is out of use at a time.
Can you add safety lines and walkways?+
Yes. Aisle lines, pedestrian walkways, hazard zones and parking or staging areas can be laid out in the coating so they are part of the floor rather than tape on top of it.
Is polished concrete or epoxy better for a warehouse?+
Both work well. Polished concrete has no coating to wear off and suits large, dry spaces; epoxy adds chemical resistance, colour and line striping and seals the surface. We explain the trade-offs for your building in the quote.
Do you offer warehouse & industrial epoxy across Kingston?+
Yes. We work throughout Kingston, including Sydenham District, Portsmouth, Cataraqui North, Westbrook, Bayridge, Kingston East and Rideau Heights, and in nearby Belleville, Trenton, Cobourg, Peterborough and Port Hope.
More floors for Kingston
Alongside warehouse & industrial epoxy, we also install concrete crack and spall repair, concrete grinding and coating removal and commercial epoxy flooring in Kingston, so related work can be planned together.
Other commercial & industrial services in Kingston: commercial epoxy flooring, polished concrete, grind & seal concrete, concrete crack & spall repair and concrete grinding & coating removal.
Further reading
Your Kingston floor, done properly.
Send the square footage and a few photos, or book a consultation. You will receive a clear written quote, with no obligation.